Touring Bindings ST 1.0.

Produktbeschreibung

Based on our expertise in making ski jumping bindings that have won first places all over the world and at the Olympic Games, we have developed the ST Touring bindings, the ultimate in high performance and durability for touring skiing enthusiasts. Whether you’re exploring your favourite local trails in powder or facing the mighty slopes of glaciers, you can rely on consistent and reliable performance.

When climbing, the skier must step into the toe section and lock the lever in the front. The pins on the heel section must be covered with a riser or turned 180° so that the heel remains free for walking (straight step). On the descent, the skier must step on the pins on the heel so that the heel is locked. As a general rule, the front lever should be unlocked so that vertical and lateral release can be performed if necessary. When skiing on very exposed terrain, where losing the skis is not an option, it is recommended to keep the lever locked.

Key features:

1. Strong construction: the ST Touring bindings, based on pin technology, are mainly composed of 7075-T651 aluminium, which ensures exceptional strength and resistance. It is designed to perform well in a wide range of environmental conditions, making it a reliable choice for all your adventures. The pins and springs are made of hardened steel. The bolts and pins on the folds are made of stainless steel (inox 1.4404).

2. The spacer AFD (Anti Friction Device): adjustable according to the thickness of the ski boot sole from 15.5 mm to 24 mm. For those who want to reduce weight, it can be easily removed.

3. Heel Fore/aft: With 6 mm of fore/aft heel travel, the heel section compensates for the compression of the skis, ensuring a smoother ride on uneven snow and reducing the risk of a too-early release.

4. Riser steps: the heel provides a stable platform for challenging ski trails and its design ensures that it won’t accidentally release when it doesn’t need to. When adjusting the heel, you have the option to use the riser steps over the pins or to turn the heel 180°, allowing almost zero degrees of tilt. A user-friendly design that allows for quick transitions using the ski pole, so you can easily adapt to changing terrain. 2 levels of rise + flat available. Heights are 48 mm and 64 mm, which is sufficient for most users with modern ski boots that allow good ankle mobility.

5. Boot Sole Length (BSL) adjustment: BSL adjustment is an impressive 50 mm, allowing for a wide range of boot sizes and shapes.

6. Release Force Adjustment (DIN): Vertical and lateral release. Fixed, 5-6, 7, or 9-10
To adjust the release force according to a given DIN number, it should be noted that this force can vary. To adjust the vertical release, follow the steps below:

1. Loosen the two screws at the top rear.
2. Pull out the U-spring and replace it with another one.

The lateral release can be operated with four springs and balls. Follow these steps to add or remove springs/ball:

1. Loosen the screw while the U-spring is tilted forwards.
2. Place the first stage of the riser over the U-spring.
3. Turn the heel in either direction.

This will give access to all four holes. The number of springs/spheres according to DIN numbers is as follows: two around DIN 5-6, three around 7, and four around 9-10.

7. Adapter for the crampons: The bindings are equipped with a crampon adapter (adjustable with ATK, Dynafit,…) for better grip on icy or challenging surfaces, which, like the AFD spacer, can be removed to reduce weight further.
With its promise of unwavering performance, reliability and outstanding durability, the ST Touring Bindings are the smart choice for keen touring skiers looking for the best in their equipment. Reliability and performance in life-or-death situations is also proven by the trust placed in the ST Touring bindings by the Slovenian mountain rescue team, which uses them on the demanding terrain of the Slovenian Alps.

Enhance your adventures and conquer new peaks with trust and style.

Technische Beschreibung

Zusätzliche Informationen

Lieferung

Ihre Bestellung wird in 1-5 Arbeitstagen bearbeitet und versandt. Die Lieferung erfolgt innerhalb der EU in 6 Arbeitstagen und in 14 Arbeitstagen für Länder außerhalb der EU.Die

Versandkosten richten sich nach Produktgröße, Gewicht und Lieferort. Es stehen mehrere Versanddienste zur Verfügung, darunter DHL, FEDEX und Pošta Slovenije. Die genauen Versandkosten werden an der Kasse berechnet.

Garantie

Um die Garantie in Anspruch zu nehmen, muss das Produkt zusammen mit der Rechnung auf Kosten des Käufers an den Verkäufer zurückgeschickt werden. Bitte beachten Sie, dass die Garantie nicht für Schäden gilt, die durch unsachgemäße Handhabung, Montage, Einstellung, Lagerung oder Verwendung sowie durch allmähliche Abnutzung entstehen. Verschleißteile (z.B. Clips), Materialschutz und Aufkleber sind ebenfalls nicht von der Garantie abgedeckt.

Rückversand und Umtausch

Sie können das Produkt innerhalb von 14 Tagen nach der Lieferung zurückgeben oder umtauschen, sofern es keine Gebrauchsspuren aufweist und sich im gleichen Zustand wie bei der Lieferung befindet. Das Produkt muss in der Originalverpackung zurückgeschickt werden.

Für Rückgabe oder Umtausch kontaktieren Sie uns bitte per E-Mail unter info@slatnar.com